Talk to a Concrete Expert
White concrete mixer truck parked beside wooden forms at a residential job site

Concrete Slab Coconut Creek: Concrete Slabs, Foundations, Shed Pads and AC Pads

Trusted Concrete Slabs and Foundations in Coconut Creek, FL and Broward County

If you need a foundation pad for a shed, an AC unit, a garage or a new home, Concrete Contractor of Coconut Creek pours it in Coconut Creek and across Broward County. We pour shed slabs, AC pads, garage floors, slabs for home additions, footers and concrete foundations for whole homes. Whether it is a small backyard pad or a commercial slab, you get concrete poured to at least the Florida Building Code minimum thickness. Every slab goes over a vapor retarder, on a base compacted for Broward's sandy ground.

Why homeowners choose us:

  • 20+ years pouring concrete across Broward County
  • Licensed and insured with the certificate available on request
  • Permits handled we file the application and schedule the inspections
  • Free written estimates with every line of the price broken out

You work with a crew that has 20+ years pouring concrete in Broward County and more than 1,200 driveways, patios and pool decks behind it. We know how high the water table sits here, so every slab goes in over a vapor retarder with steel where the load calls for it. You get a free written estimate with the base prep, the concrete, the steel and the finish each priced on its own line.

Talk to a Concrete Expert
Get a Free Concrete Quote

What Concrete Slabs and Foundations Involves in Coconut Creek, FL

Every concrete slab we pour in Coconut Creek, from a small AC pad to a whole-home foundation, follows the same steps:

  • Site prep and grading levels the ground and compacts the base, which keeps the slab from settling into Broward sand.
  • Forming sets the edges, the height and the slope of the slab, so water drains away from the building.
  • Vapor retarder lays a 6-mil polyethylene sheet under the slab, lapped at least 6 inches at the joints, which keeps ground moisture out of the concrete.
  • Reinforcement places steel so the slab holds together if the ground moves, with 3 inches of concrete cover where the concrete is cast against the ground.
  • Thickened footings deepen the slab edges under walls and heavy loads on foundation and addition slabs.
  • The pour places the concrete in one continuous pass, at least 3.5 inches thick under the Florida Building Code.
  • Finishing gives the slab a smooth trowel finish for a garage or addition, or a broom finish outdoors.
  • Curing keeps the slab damp while it gains strength, which matters most in Florida heat.

When You Need Concrete Slabs and Foundations in Coconut Creek

Most homeowners call about a slab when they are adding something to the property or replacing a base that has failed. The signs below mean a new slab is the right fix.

Signs You Need Concrete Slabs and Foundations in Coconut Creek

  • A new shed, AC unit or generator needs a level, solid base. Setting it on soil or pavers lets it tilt as the ground settles.
  • A home addition or garage needs a slab foundation poured to code before framing starts.
  • A cracked or sunken garage floor means the base underneath has moved. A floor that keeps cracking should be replaced on a compacted base.
  • An AC pad that has tilted strains the unit and the refrigerant lines. The pad should be replaced before the lines are damaged.
  • A new home build needs a foundation slab formed, reinforced and inspected before the house goes up.

How Coconut Creek Soil and Weather Affect Concrete Slabs and Foundations

Concrete slabs and foundations in Coconut Creek deal with heat, humidity, sandy ground and a heavy rainy season. Each of those conditions causes a different kind of failure.

Sand and a high water table underneath

Broward County sits on sand and porous limestone, not clay. Some local soils are saturated right to the surface from June to September. Concrete poured on a loosely packed base over wet sand settles, so the base is compacted before any concrete goes down.

Heat cracks concrete before it has cured

Normal highs at Fort Lauderdale reach 89 to 91°F in July and August. Because hot air and wind pull water out of fresh concrete, the surface can dry faster than the slab can replace it. Industry guidance calls for precautions once evaporation passes 0.2 lb per square foot per hour. We pour early in the morning in hot weather, and we reschedule if the heat index is too high.

Humidity leaves a weaker surface

Concrete that cures at high temperature ends up weaker than the same mix cured at 70°F. High humidity lowers compressive strength as well, and it breaks down sealers and coatings laid over the concrete.

The building code sets the minimum

The Florida Building Code requires a slab on ground to be at least 3.5 inches thick, with a 6-mil vapor retarder lapped 6 inches at the joints. Broward County is also part of the High-Velocity Hurricane Zone, which sets stricter rules for structures built here.

How Much Does Concrete Slabs and Foundations Cost in Coconut Creek, FL?

Concrete slab cost in Coconut Creek depends on the size of the slab, the thickness and the reinforcement. The ranges below cover the slabs we quote most often.

JobTypical priceKey variables
Shed pad$1,000 to $1,700thickness, access
Small slab$1,450 to $2,400thickness, access
Medium slab$4,000 to $6,800thickness, grading, reinforcement
2-car garage slab$5,200 to $8,700thickness, reinforcement, vapor retarder
Large slab$9,100 to $15,200grading, reinforcement, pump truck
Home foundation slab$21,200 to $35,300size of the home, footings, engineering

A slab for a patio is priced on our concrete patios page.

Our Concrete Slabs and Foundations Process in Coconut Creek, FL

Every concrete slabs and foundations job follows the same four steps, from the first visit to the finished work.

1. Free Estimate

We measure the slab area, check the ground and the drainage, and confirm what the slab will carry. You get a free written estimate with the base prep, the concrete, the steel and the finish priced as separate lines. Foundation slabs are quoted from the plans.

2. Permit and Site Prep

We file the permit, then grade and compact the base. Site prep takes 1 to 3 days on most slabs. A foundation slab takes longer, because the footings are dug and inspected first.

3. Forms, Steel and Pour

The forms, vapor retarder and steel go in, and the slab is poured and finished in one day. Small and medium slabs take 3 to 5 days from prep to finished pour. Foundation work runs 1 to 3 weeks.

4. Cure and Load

The slab takes foot traffic after about 2 days and reaches about 70% of its strength at 7 days. Sheds, AC units and framing go on once the slab has cured enough to carry them, with full strength at 28 days.

The same crew also handles concrete driveways, concrete patios and concrete pool decks.

Concrete Slabs and Foundations FAQs: Coconut Creek, FL

How much does a concrete slab cost in Coconut Creek?

A shed pad in Coconut Creek costs $1,000 to $1,700, and a 2-car garage slab runs $5,200 to $8,700. A whole-home foundation slab runs $21,200 to $35,300. The size, the thickness and the reinforcement move the price within each range.

How thick does a concrete slab need to be in Florida?

A concrete slab on ground in Florida must be at least 3.5 inches thick under the Florida Building Code. The slab also needs a 6-mil polyethylene vapor retarder lapped at least 6 inches at the joints. Slabs that carry heavier loads are poured thicker.

How long does a concrete slab take?

A small or medium concrete slab takes about 3 to 5 days from site prep to finished pour. A foundation slab takes 1 to 3 weeks. The slab then cures, reaching about 70% of its strength at 7 days and full strength at 28 days.

Do you pour whole-home foundations?

We pour whole-home foundation slabs as well as slabs for additions, garages and sheds. A foundation slab is formed, reinforced with steel and poured with thickened footings under the walls. It is quoted from the building plans.

When can I put a shed on a new slab?

A shed can go on a new concrete slab once the slab has cured for about a week, when it reaches about 70% of its strength. Heavier loads should wait for full strength at 28 days.

Does a concrete slab need a vapor barrier?

A concrete slab on ground in Florida needs a 6-mil polyethylene vapor retarder under it. The sheet keeps ground moisture from wicking up into the slab, which matters on Broward's high water table.

Concrete Contractor of Coconut Creek serves Coconut Creek and Broward County, including Coral Springs, Deerfield Beach, Parkland, North Lauderdale.

Get a Free Concrete Slabs and Foundations Quote in Coconut Creek, FL

Get a Free Concrete Quote
Get a Free Concrete Quote