New broom-finish concrete driveway and front walkway leading to a two-car garage, with palm trees and landscaping

Concrete Driveway Coconut Creek: Concrete Driveway Installation and Replacement

Affordable Concrete Driveway Installation in Coconut Creek, FL and Broward County

If you need a new driveway or want an old one replaced, Concrete Contractor of Coconut Creek is the crew to call in Coconut Creek and across Broward County. Our concrete driveway installation covers new construction and gravel driveways turned into concrete, and our concrete driveway replacement takes out cracked and sunken slabs. Whether you own a home, a townhome in an HOA community or a commercial property, you get a driveway poured on a compacted base and sloped toward the street. Rain runs off it instead of soaking in.

Why homeowners choose us:

  • 20+ years pouring concrete across Broward County
  • Licensed and insured with the certificate available on request
  • Permits handled we file the application and schedule the inspections
  • Free written estimates with every line of the price broken out

You work with a crew that has 20+ years pouring concrete in Broward County and more than 1,200 driveways, patios and pool decks behind it. We know what afternoon heat does to a fresh driveway, so on hot days we pour in the morning. You get a free written estimate with the removal, the base prep, the concrete and the finish each priced on its own line.

Get a Free Concrete Quote

What Concrete Driveway Installation Involves in Coconut Creek, FL

Every concrete driveway we pour in Coconut Creek follows the same steps, whether it is a new build, a replacement or a gravel driveway turned into concrete:

  • Removal of the old driveway breaks out the existing slab and hauls it away, so the new concrete sits on fresh ground instead of old rubble.
  • Base preparation grades and compacts the ground under the driveway, which is what keeps a slab from sinking on Broward’s sandy soil.
  • Forming sets the edges and the slope, so the finished driveway drains toward the street instead of toward the garage.
  • Reinforcement adds steel where the load calls for it, which holds cracks tight if the ground moves.
  • The pour places the concrete in one continuous pass, so there are no weak cold joints across the driveway.
  • Finishing gives the surface a broom finish for grip, a smooth trowel finish, or a stamped pattern if you want something other than gray.
  • Control joints are cut at planned spots, so the concrete cracks along a straight line instead of wandering across the slab.
  • The apron ties the driveway into the street, where tires hit the edge hardest and cheap work fails first.

When You Need a Concrete Driveway Replacement in Coconut Creek

Most homeowners call about a driveway when it starts to look or feel wrong underfoot. The signs below usually mean the concrete needs work, and waiting tends to turn a repair into a full concrete driveway replacement.

Signs Your Coconut Creek Driveway Needs Work

  • Chips flaking off the surface, often dime to quarter size, mean the top layer is weak. Left alone, water gets under the flakes and the damage spreads across the slab.
  • Cracks in the seams between slabs let water reach the base. Rain then washes sand out from under the driveway and the slab starts to sink.
  • A sunken section or a lip at the garage means the base under that section has settled. The drop gets worse each rainy season and can crack the slab through.
  • Standing water after a storm means the driveway was poured too flat. Water that sits on the surface soaks in and weakens the concrete from below.
  • Orange rust and sprinkler stains soak into bare concrete. Stains left through a summer set permanently and need resurfacing to remove.

For smaller problems, our concrete repair service levels and patches a driveway without a full tear-out.

How Coconut Creek Soil and Weather Affect a Concrete Driveway

Concrete driveways in Coconut Creek deal with conditions that a driveway in most of the country never sees. Heat, humidity, sandy ground and heavy seasonal rain each cause a different kind of failure.

Florida heat cracks a driveway before it has cured

Normal highs at Fort Lauderdale reach 89 to 91°F in July and August. Because hot, windy air pulls water out of fresh concrete, the surface can dry faster than the slab can replace it. Industry guidance calls for precautions once evaporation passes 0.2 lb per square foot per hour. A driveway poured on a summer afternoon without them cracks before it has any strength, so we pour early in the morning.

Humidity and heat leave a weaker surface

Concrete that cures at high temperature ends up weaker than the same mix cured at 70°F. High humidity lowers compressive strength as well, and it breaks down sealers and coatings laid over the slab. A weaker surface is the one that flakes first under tires.

Sand and limestone under the driveway

Broward County sits on sand and porous limestone, not clay. Some local soils are saturated right to the surface from June to September. A driveway poured on a loosely packed base over wet sand settles, which is why the base is compacted before any concrete goes down.

Rain decides whether the driveway lasts

The rainy season runs from May 15 to October 15 and brings nearly 70% of the year’s rain. The American Concrete Institute recommends a 1/4 inch per foot slope for exterior slabs, so every driveway we pour drains toward the street.

How Much Does a Concrete Driveway Cost in Coconut Creek, FL?

Concrete driveway cost in Coconut Creek depends on the size of the driveway, the finish and how much old concrete has to come out first. The ranges below cover the driveways we quote most often.

JobTypical priceKey variables
1-car driveway$2,400 to $3,900finish, base prep, removal of old slab
Wide 1-car driveway$3,400 to $5,600finish, base prep, removal of old slab
Standard 2-car driveway$4,700 to $7,900finish, apron to the street, removal
Large 2-car driveway$6,800 to $11,300finish, apron to the street, removal
3-car driveway$10,200 to $17,100finish, grading, removal

A stamped finish costs more than a broom finish. See our stamped concrete page for decorative driveway pricing.

Our Concrete Driveway Installation Process in Coconut Creek, FL

Every concrete driveway follows the same four steps, from the first visit to the day you park on it.

1. Free Estimate

We measure the driveway, check the old slab and the ground under it, and look at how water drains off the lot. You get a free written estimate with the removal, the base prep, the concrete and the finish priced as separate lines. Nothing is poured until you have approved it.

2. Permit and Removal

We file the Coconut Creek Engineering Permit with the survey, the tree affidavit and an HOA letter where needed. Once the permit is issued, the old driveway is broken out and hauled away. Removal and base prep take 1 to 3 days, depending on how thick the old slab is and whether it has rebar in it.

3. Base, Forms and Pour

The base is graded and compacted, the forms set the slope, and steel goes in where the load calls for it. The pour and the finish happen in one day, in the morning during hot weather. Heavy rain or a high heat index moves the pour to the next safe day.

4. Cure and First Use

The new driveway takes foot traffic after about 2 days and a car after 7 days. Full strength comes at 28 days, so moving trucks and heavy equipment wait until then. The whole job runs 4 to 10 days from site prep to finished pour, plus curing time.

The same crew also handles concrete patios and concrete pool decks.

Concrete Driveways FAQs: Coconut Creek, FL

How much does a concrete driveway cost in Coconut Creek?

A standard 2-car concrete driveway in Coconut Creek costs $4,700 to $7,900. A 1-car driveway runs $2,400 to $3,900, and a 3-car driveway runs $10,200 to $17,100. The finish, the base prep and how much old concrete comes out move the price within each range.

How long before I can drive on a new concrete driveway?

A new concrete driveway takes foot traffic after about 2 days and a passenger car after 7 days. Heavy vehicles such as moving trucks should stay off until the concrete reaches full strength at 28 days. The edges of a new driveway cure last, so keep tires off them for the first month.

How long does a concrete driveway take to install?

A concrete driveway takes about 4 to 10 days from site prep to finished pour. Tearing out the old slab and compacting the base takes 1 to 3 days, and the pour itself takes 1 day. The driveway then cures for 7 days before a car goes on it.

Do I need a permit for a new driveway in Coconut Creek?

Coconut Creek requires an Engineering Permit for a residential driveway. The application uses a property survey with the driveway area highlighted and the setbacks marked. A tree affidavit is required on every residential application, and an HOA approval letter is required where an HOA applies.

Can a gravel driveway be turned into concrete?

A gravel driveway can be turned into concrete once the gravel is graded and compacted into a firm base. Loose or thin gravel is topped up first, because a concrete driveway is only as solid as the ground under it. The finished driveway is then formed, poured and sloped toward the street.

Should I repair or replace my concrete driveway?

A concrete driveway can be repaired when the slab is still level and solid underneath. A typical driveway repair runs $1,400 to $2,300, against $4,700 to $7,900 for a new 2-car driveway. Replacement makes sense when the driveway has sunk, broken through or keeps cracking after repair.

Concrete Contractor of Coconut Creek serves Coconut Creek and Broward County, including Coral Springs, Deerfield Beach, Parkland, North Lauderdale.

Get a Free Concrete Driveways Quote in Coconut Creek, FL

Get a Free Concrete Quote